Hop disease management in Michigan for 2018

Implement early, preventative fungicide programs and pruning practices for powdery mildew and downy mildew management.

Cones infected with powdery mildew. Photo by Melanie Filotas, OMAFRA.

Cones infected with powdery mildew. Photo by Melanie Filotas, OMAFRA.

Downy mildew management will remain a major point of focus for Michigan hop growers in 2018, but with damaging powdery mildew infections in 2017, you will need to add new fungicides to your disease management program. The downy and powdery mildew pathogens are completely unrelated and are not generally controlled by the same fungicides; if you have not been applying preventative sprays for powdery mildew, you will need to increase fungicide applications this season.

Use clean planting material when establishing new hop yards since both mildew species are readily spread via nursery stock. Consider purchasing a few plants from prospective nurseries and have them tested for diseases including mildews and viruses before committing to a large numbers of plants. Additionally, any other signs of poor handling at the propagator level may be used as an indicator of plant quality. Other signs of poor handling include mite or aphid infestations, spray damage or poor root development, and would be grounds for rejecting a delivery of plants.

Scouting

Scouting for downy and powdery mildew involves monitoring the crop for signs and symptoms of disease to evaluate the efficacy of the control program being utilized. Downy and powdery mildew management begins as soon as plants emerge; do not wait until you see disease to start fungicide applications or cultural practices. Keep records of your scouting, including maps of fields, a record of sampling and disease pressure, and the control measures utilized. Being scouting as soon as plants begin to grow and continue until the crop is dormant.

Section your farm off into manageable portions based on location, size and variety and scout these areas separately. It is more practical to deal with blocks that are of the same variety, age and spacing. Walk diagonally across the yard and along an edge row to ensure you view plants from both the edge and inner portion of the block. Change the path you walk each time you scout to inspect new areas. Reexamine hotpots where you have historically encountered high mildew pressure. Weekly scouting is recommended at a minimum. Refer to the seasonal pest occurrence guide for more information.

Hop powdery mildew

Powdery mildew, caused by the fungus Podosphaera macularis, is an emerging disease in Michigan that has serious implications for growers. Powdery mildew was confirmed in Michigan in 2014 and has been a concern on greenhouse and nursery plants for years. It was rarely an issue in the field until 2017 when mild spring conditions and likely introduction of the pathogen from greenhouse plants resulted in significant powdery mildew disease on mature plants in hopyards without a history of disease.

Disease cycle

Powdery mildew overwinters as fungal threads inside buds and in association with plant debris infected during the previous season. Shoots emerging from infected buds can be covered with spore masses, appearing white, stunted and with distorted leaves. These “flag shoots” are rare, and healthy shoots quickly outgrow infected shoots, making detection difficult. The spore masses on flag shoots spread to adjacent healthy tissue causing new infections.

Sexual spores (ascospores) may also be present in spring. Ascospores are discharged and land on newly emerged shoots where they germinate, infect the plant and eventually produce a new spore mass of asexual spores (conidia). Conidia are produced in large numbers over multiple cycles and are dispersed via wind, rain splash, insects, tractors, equipment and humans.

Podosphaera ifecycle

The life cycle of Podosphaera macularis, the causal agent of hop powdery mildew. Prepared by V. Brewster, Field Guide for Integrated Pest Management in Hops, Third Edition.

Conditions that favor powdery mildew include low light levels resulting from cloud cover, canopy density, excessive fertility and high soil moisture. Leaf wetness from dew or rain does not directly impact powdery mildew infection, but results from high humidity and cloud cover, which favors disease. Temperatures from 46 to 82 degrees Fahrenheit allow powdery mildew to develop, but disease is favored by temperatures of 64 to 70 F; disease risk decreases when temperatures consistently exceed 86 F for 6 hours or more.

Powdery mildew symptoms

Powdery mildew resulting from bud infection appears in the spring on white, stunted shoots called flag shoots. As leaf tissue expands, lesions first appear as raised blisters on leaves, which quickly develop into white, round colonies. Infected burrs and cones can also support white fungus or may exhibit a reddish discoloration if infected later in development. Burrs and young cones are very susceptible to infection, which can lead to cone distortion, substantial yield reduction, diminished alpha-acids content, color defects, premature ripening, off-aromas and complete crop loss.

Infected flat shoot

Hard to spot white flag shoot emerging in spring with powdery mildew. Photo by David Gent, USDA ARS.

Cones become somewhat less susceptible to powdery mildew with maturity, although they never become fully immune to the disease. Infection during the later stages of cone development can lead to browning and hastened maturity. Alpha-acids typically are not influenced greatly by late-season infections, but yield can be reduced by 20 percent or more due to shattering of overly dry cones during harvest resulting from accelerated maturity.

Late-season powdery mildew can be easily confused with other diseases such as Alternaria cone disorder, gray mold or spider mite damage. Several weak pathogens and secondary organisms can be found on cones infected by powdery mildew; limiting powdery mildew reduces these secondary organisms.

Powdery mildew on leaves

Powdery mildew on leaves, causing raised lesions and white fungal colonies to be visible. Photo by Erin Lizotte, MSU Extension.

Managing powdery mildew

Limiting powdery mildew is best approached by integrating resistant varieties, sourcing clean planting material, following crop sanitation practices, limiting early-season disease establishment, optimizing fertilization and irrigation, and well-timed fungicide applications. While you may not be able to select resistant varieties because of market factors, some resistant varieties are available.

The reaction of a hop variety to powdery mildew varies depending on where it is grown and which isolates of the fungus are present. Generally, Columbus, Cashmere and Galena are considered susceptible; Centennial and Chinook are intermediate; Nugget, Newport and Cascade are resistant, although races of the fungus present in Pacific Northwestern U.S. can overcome the resistance in the varieties as well.

Powdery mildew management begins in early spring with thoroughly removing all green tissue during pruning. The goal of this early pruning is to remove the hard to locate flag shoots and delay or prevent infection. Eliminating flag shoots and early-season disease requires removing all shoots, including those closest to the ground, on sides of hills and around poles or anchors. Mechanical pruning has been shown to be more effective than chemical pruning in eliminating flag shoots.

Pruning has not been widely adopted in Michigan, but should be considered to minimize risk, particularly if you are experiencing intense powdery or active infections are reported in the region. Pruning should be avoided on baby hop plants (less than 3 years old). Watch the Michigan State University Extension Hops page for a forthcoming article on pruning and canopy management.

Prevent infection with regular fungicide applications. Appropriate timing of the first fungicide application after pruning is important to keep disease pressure at manageable levels. This application should be made as soon as possible after shoot emergence or regrowth in pruned yards.

Different fungicides are utilized for powdery mildew control during three distinct periods of the season: emergence to mid-June; mid-June to bloom; and bloom to pre-harvest. The Fungicide Resistance Action Committee (FRAC) mode of action classification codes are included to help growers make resistance management decisions.

  • From emergence to mid-June, consider a combination of applications of sulfur (FARC M2), oils, Flint (trifloxystrobin, FRAC 11), Rhyme (flutriafol, FRAC 3), Procure 480 SC (triflumizonle, FRAC 3) or Unicorn DF (tebuconazole plus sulfur, FRAC 3 plus M2). Under high pressure, growers should tank mix with oils and integrate copper (FARM m1) into their downy mildew programs when possible. Avoid tank-mixes of copper and sulfur as phytotoxicity may occur.
  • From mid-June to bloom, consider Rhyme (flutriafol, FRAC 3), Procure 480 SC (triflumizole, FRAC 3), Luna Experience (fluopyram plus tebuconazole, FRAC 7 plus 3), Vivando (metrafenone, FRAC U8) and Torino (cyflufenamid, FRAC U6, view supplemental label). Under high pressure, tank-mix with oils and integrate copper into your downy mildew programs when possible.
  • From bloom to pre-harvest, use a combination of Quintec (quinoxyfen, FRAC 13, 21-day pre-harvest interval), Pristine (pyraclostrobin plus boscalid, FRAC 11 plus 7, 14-day pre-harvest interval), Luna Sensation (fluopyram plus trifloxystrobin, FRAC 7 plus 11, 14-day pre-harvest interval) and Torino (cyflufenamid, FRAC U6, six-day pre-harvest interval, view supplemental label).

Many fungicide programs can give adequate disease control on leaves when applied preventively under low disease pressure. On cones, however, differences among fungicides are substantial. Mid-July through early August is an essential disease management period. The fungicide Quintec (quinoxyfen) and Luna Sensation (fluopyram plus trifloxystrobin) are especially effective during this time and should be utilized in regular rotation when burrs and cones are present.

Fungicide applications alone are not sufficient to manage the disease. Under high disease pressure, mid-season removal of diseased basal foliage delays disease development on leaves and cones. Do not apply desiccant herbicides until bines have grown far enough up the string so that the growing tip will not be damaged and bark has developed. In trials in Washington, removing basal foliage three times with a desiccant herbicide (e.g., AIM) provided more control of powdery mildew than removing it once or twice.

Established yards can tolerate some removal of basal foliage without reducing yield. This practice is not advisable in baby plantings (less than 3 years), and may need to be considered cautiously in some situations with sensitive varieties such as Willamette. The potential for quality defects and yield loss increases with later harvests when powdery mildew is present on cones.

The cultural recommendations above apply to hops produced for conventional commercial markets and those grown under guidelines for organic production. Under the additional constraints imposed by organic production guidelines, particular attention must be paid to selecting disease-resistant varieties. This is the foundation upon which organic production will succeed or fail with respect to the major fungal diseases. Available fungicide options for organic production are minimal and generally mediocre under high disease pressure. Although frequently cited in popular literature, optimal fertilization, soil health and water management alone are inadequate for disease control.

Likewise, biorational compounds, biological controls, manure teas and various botanicals and natural products have shown minimal to no efficacy against this pathogen under moderate to severe disease pressure. Organic producers should consider a sulfur or oil-based fungicides. Sulfur and oil should not be tank mixed due to phytotoxicity issues.

Hop downy mildew

Downy mildew is caused by a fungus-like organism called Pseudoperonospora humuli and is the most significant disease of hop in Michigan, causing significant yield and quality losses. In extreme cases, cones can become infected and the crown may die. Cool and damp conditions during the spring provide ideal growth conditions for the pathogen. Disease severity is dependent on variety, environmental conditions, and management programs.

Disease cycle

The causal agent of downy mildew, Pseudoperonospora humuli, overwinters in dormant buds or crowns and can emerge on infected shoots in early spring. This results in the so-called basal “spike”. Infected crowns can produce uninfected shoots as well, making detection of spikes difficult, particularly on potted baby hop plants that have been cut back.

The pathogen produces copious spores on the underside of infected leaves, which infect new tissue through open stomata. These new infections produce a second source of spores, which can infect all parts of the plant. Infections occurring on the terminal growing point become systemic and grows down the plant toward the crown, where the pathogen can persist in the root system a prolonged period. Systemic infections contribute to the spread of infection through propagation and also allow for the pathogen to survive winter, contributing to disease pressure in subsequent seasons.

The pathogen can also produce a resting spore and overwinter, but it is unclear how or if these resting spores contribute to infection and how readily they are produced under Michigan conditions.

Infection is favored by mild to warm temperatures of 60-70 F when free moisture is present for at least 1.5 hours, although leaf infection can occur at temperatures as low as 41 F when wetness persists for 24 hours or longer.

Disease life cycle

Life cycle of Pseudoperonospora humuli on hop. Photo by V. Brewster, Compendium of Hop Diseases and Pests. View larger image.

Downy mildew symptoms

Downy mildew appears early in the season on emerging, infected shoots (the basal spikes). Spikes growing from infected crowns or buds may be distorted with shortened internodes that give the shoot a stunted appearance.

Downy on hop

Yellow and stunted spring hop spike, systemically infected with hop downy mildew with spore masses on leaf tissue. Photo by Erin Lizotte, MSU Extension.

Downy on hop

Stunted side-arm growth and distorted, pale leaves caused by downy mildew infection on hop. Photo by Erin Lizotte, MSU Extension.

It is easy to confuse some mild herbicide injury from Round Up applications with downy mildew as they both produced stunted shoots. Round Up injury on the first flush of growth is very common, so it is important to recognize the difference.Herbicide injury will cause chlorosis that follows leaf venation and leaves will be misshapen and appear more “strappy”. Glyphosate-injured growth will also lack the signs of downy mildew, including the spore masses on the underside of leaves. Infected shoots develop spore masses on the underside of leaves that follow venation.

Hop damage

Glyphosate injury on the left and downy spike on the right. Photo by Erin Lizotte, MSU Extension.

As secondary infections occur, leaves develop angular, water-soaked lesions that follow leaf venation. Eventually, the water-soaked lesions turn brown and necrotic with fuzzy and gray-black asexual spore masses developing on the underside of infected lesions. As bines continue to expand, new shoots becomes infected, brittle and fall away from strings. You can attempt to retrain new shoots, but you may incur yield loss as a result of missing the ideal training timing.

Downy mildew on leaves

Angular lesions on the upper leaf surface of hop caused by downy mildew infection. Photo by Erin Lizotte, MSU Extension.

Powdery mildew on leaves

The downy mildew pathogen spore masses on the underside of a hop leaf. Note the small, angular, water-soaked lesions where sporulation has not yet occurred. Photo by Erin Lizotte, MSU Extension.

As the season progresses, symptoms may include stunted side-arm growth, tip die-back and cone discoloration. The fuzzy, visible growth of downy mildew is not always present on cones and should not be relied upon as the sole indicator of whether infection is present.

Downy on hop cones

Downy mildew on hop cones. Photo by Erin Lizotte, MSU Extension.

Managing downy mildew

Unfortunately, even when we follow best management practices, downy mildew can gain a foothold in Michigan yards due to high disease pressure, challenges with fungicide timing, suboptimal spray coverage, fungicide wash-off, cultivar susceptibility or a combination of these factors. In addition, fungicide resistance and infected nursery plants may play a role in some disease control failures.

It takes a multipronged approach to manage for downy mildew. Utilize a protectant fungicide management strategy to mitigate the risks of early and severe infections, but also utilize cultural practices to reduce disease. Keep in mind that varieties vary widely in their susceptibility to downy mildew and select the more tolerant varieties when possible (refer to Table 2 in the Field Guide for Integrated Pest Management in Hops).

Removing the first flush of growth can help suppress disease development if disease is already present in the yard from the previous season. The flush of growth should be completely removed using mechanical or chemical pruning. As bines develop to 8-10 inches, remove superfluous basal foliage and lower leaves to promote air movement in the canopy and reduce the duration of wetting periods. This is commonly achieved through multiple applications of Aim herbicide or concentrated nitrogen fertilizer solutions. Aim will also control smaller weeds within the row.

Using Aim, pruning or crowning should not be performed on baby hop plants (less than 3 years old). If there is a cover crop, mow it close to the ground. If yards have no cover crop, cultivation can help to dry the soil and minimize humidity. Keep nitrogen applications moderate.

Apply fungicide treatments on a protectant basis as soon as bines emerge in the spring regardless of the presence or absence of visible symptoms of downy. Dormant applications are not recommended. Applications should continue season long on a seven-to-10 day reapplication interval until harvest. The time between applications may stretch longer when the weather is dry and if hop yards don’t have active infections.

Several periods in the season are particularly critical for disease control: immediately before and after training; when lateral branches begin to develop; bloom; and cone development. Covering young, developing bracts before cones close up is critical to protecting against downy mildew when conditions for disease are favorable. Getting adequate coverage on undersides of bracts where infection occurs becomes increasingly difficult as cones mature.

Ranman (cyazofamid, FRAC 21), Zampro (ametoctradin plus dimethomorph, FRAC 45 plus 40) and Revus (mandipropamid, FRAC 40) make up the backbone of effective downy mildew management programs in Michigan. Rotate and potentially mix these products with Curzate (cymoxanil, FRAC 27), Tanos (famoxadone plus cymoxanil, FRAC 11 plus 27) and phosphonate products such as Aliette (fosetyl-Al, FRAC 33) to help prevent resistance development. Copper-based fungicides may also be rotated in during periods of low disease pressure and as tank-mix partners. Revus and Zampro contain active ingredients with the same mode of action and should not be tank-mixed or rotated.

Organic growers have fewer options and will need to focus on keeping tissue protected, selecting downy mildew tolerant varieties and following cultural practices to limit downy infection. Copper-based products are the mainstay of downy mildew management in organic hop yards and offer five to seven days of protection, but no post-infection activity. Copper should be applied ahead of any wetting events as available. The pre-harvest intervals for copper formulations vary, refer to the label. Actinovate, Eco-mate, Armicarb-O and Sonata are additional products that list downy mildew on the label and are approved for organic use in hop. The pre-harvest interval for these products are one day or less; at this time we have no data on the efficacy of these products.

Resistance management

The powdery and downy mildew pathogens are at high risk of developing fungicide resistance, therefore careful attention to resistance management is critical. To slow the development of resistance, rotate between fungicides with different modes of action within the season and do not apply the same mode of action consecutively. Refer to the fungicide FRAC codes found in the upper right-hand corner of most conventional fungicide labels, or refer to the Michigan Hop Management Guide. Fungicides with two numbers contain more than one fungicide and mode of action.

Stay in touch

Want to receive more pest management information for hop this season? Sign up to receive the MSU Hop News Digest or follow MSU Hops on Facebook.

This work is supported by the Crop Protection and Pest Management Program 2017-70006-27175 from the USDA National Institute of Food and Agriculture. Any opinions, findings, conclusions or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the view of the U.S. Department of Agriculture.

Related Articles